The status of a gateway may be viewed from the Status window, which is accessed by selecting the Status option located in the System area. The Status window provides a summary of the key information regarding the status of the gateway including its IoT Cloud connection and network configuration.

The values reported in the page can be reloaded using the Refresh button. This will read the current values from the system and update the page. Since the update procedure can take time, the update can be performed at most every 30 seconds.

Cloud and Data Services

This section provides a summary of the IoT Cloud connections status including the following details:

  • Service Status - provides the status of the DataService and DataTransport connection. Valid values are CONNECTED or DISCONNECTED.

  • Auto-connect - specifies whether the DataService automatically connects to the remote IoT Cloud Service on startup and disconnect.

  • Broker URL - defines the URL of the MQTT broker.

  • Account - defines the name of the account used by the MqttDataTransport service when an MQTT connection is opened.

  • Username - supplies the name of the user used by the MqttDataTransport service when an MQTT connection is opened.

  • Client ID - specifies the client identifier used by the MqttDataTransport service when an MQTT connection is opened.

Ethernet and Wireless Settings

These sections provide a summary of the network interfaces configurations as eth0, eth1 and wlan0.

Position Status

This section provides the GPS status and latest known position (if applicable) including the following details:

  • Longitude - longitude as reported by the PositionService in degrees.

  • Latitude - latitude as reported by the PositionService in degrees.

  • Altitude - altitude as reported by the PositionService in meters.

Note:

The status reported in the page may not be synchronized with the real state of the system. In this case, use the Refresh button to updated the values in the page.